Coffeetime

We are now at http://www.coffeetimeuk.com/

If your Alex case Vibrates a bit....try this

Where the outer case meets the front panel, place some sticky (single sided) hi density foam along the whole edge each side.  It's the sort of stuff commonly used in car body shops. 

Also bending the tabs slightly at the bottom of the outer case, helps pull the case in a bit more snugly. These tabs drop into slots on the frame. Only do the 2 side tabs, not the one at the back.

You are here: Home-Espresso Machines-Alex De Buzz

Previous Topic: Alex Gicar box