The Skwiggle is a delightful, 31" span EPP slope soarer, agile in every way this model is just FUN 

Has been flown in 5 to 40+ mph

Great little model, just take it with you wherever you go Kit £35 or $50 USD

Those days when the wind is just a wisp you can SAL it for extra height.                    Shipping £3.00 UK  or $10 USA

for intermediate to expert pilots.                                                                                 Contact Us                                        Home

Kit contents: 

1 Left  EPP wing panel ,1 Right  EPP wing panel ,2 x 2mm round GRP wing spars ,2 balsa elevons ,1 reinforced fin

1 nose pod ,2 x 3mm GRP pre drilled control horns ,2 piano wire control rods ,1 Skwiggle water slide decal and 1 Windows ^tm instruction CD

you'll need covering materials, glue's ect and radio gear to finish this model

Radio gear:

You need 2 small servo’s 9grams or under and no thicker than 11.6mm.

 Very important! The servos should have no movement in the servo arm or gears

1 small full range receiver 4 channel Corona or equivalent size (or any that fits the pod)

1 x 2/3AAA 350/400-mAh battery, you can use smaller if you have the charging facility’s

You will also need a transmitter with elevon mixing

I stock a limited amount of servos and batteries at reasonable cost please contact me if you require any.

We check all the servos before dispatch and will not accept stripped gears as a fault under guarantee.