The long, distinctive headstock has an end shaped like an open book, though some SBs have a cutout which makes the end look like a pair of bat's ears.
Above all, readers who own an SB are encouraged to send in photos and stories about their instrument to share with everyone. Without their wonderful contributions this page would not exist.
Aria's SB-1000 bass is widely recognised as the first high-quality original Japanese bass. Several noteworthy bassists such as John Taylor of Duran Duran and Jack Bruce helped popularise SBs in the early 80's, but the models' heyday was short-lived. Nowadays with so many other good basses on the market, SBs have become something of a forgotten secret. Yet these basses not only look beautiful, they sound good, play well if they've been properly looked after, and are superbly and solidly constructed.
Aria are still producing SBs in Japan (see below), and recently reissued the SB-1000 which sells in the UK for a hefty £1500. However this site deals mainly with the original SBs from the early 80s. If you can find a good secondhand example you may be getting a real bargain!
The backbone of every SB bass is a maple through neck which offers superb sustain. The neck is inset with two strips of darker mahogany laminate, and is nicely sculpted at the back allowing unbeatable access to the upper frets.
Careful thought has also gone into Aria's hardware. In the original series, each pickup has a little ledge where you can rest your thumb. The jack socket is on the front of the bass which makes it easier to play sitting down and easier to locate in the dark. The bridge is a very rock-solid design, and I love the fact that the strings slot in rather than passing through holes. It makes changing them a dawdle.
Smaller/shorter bass players may find the typical SB something of a handful. They can be heavy instruments (see below). It is also quite a stretch to the first fret.
The long, distinctive headstock has an end shaped like an open book, though some SBs have a cutout which makes the end look like a pair of bat's ears.
Machine heads are the small, fully-enclosed, smooth kind that has become standard nowadays. The body sides of the bass are often made from ash, and are coloured or stained to highlight the through-neck. There are various side finishes available, including black, blue and red. Personally I think the most attractive are the golden and honey stains.
Most SBs are not as heavy as these, and your shoulder will be spared!
Such basses have dot fret inlays and a narrow yet deep, super-fast neck. Slung with a lowish action, it is possible to play at lightning speed. If my bass is typical, the neck measures 44 mm wide at the nut. At the 12th fret the width is just 52 mm but a large 83 mm round the back. At the brass bridge the string-gap is a VERY narrow 16 mm, in fact the strings run almost parallel!
The SB-R80 shown is typical of this family. It has two pick-ups (the single pick-up version is called the SB-R60) and, for comparison, the neck is 42 mm wide at the nut, 55 mm at the 12th fret but still the same 83 mm round the back. The string-gap at the bridge, chrome this time, is a more normal 18 mm. That's still narrower, I am told, than a Fender Jazz! The strings on SBs such as this have a more pronounced taper inwards from bridge to nut than the narrow-necks have.
On the SB-R80, tone and volume pots are stacked for each pick-up, and as well as the teardrop-shaped pick-up selector there is a flick-switch for each pickup.
Although SB pickups are fully-enclosed, they sometimes do go wrong. Faulty ones cannot be easily repaired. In the UK there are two places you might try. Andy Blake, the Pickup Wizard in Wales may be able to help. He does not make exact replicas but can make something similar. Alternatively I can personally recommend the excellent replacements made by the English manufacturer Aaron Armstrong :
Aaron Armstrong
Unit 31
Old Surrenden Manor
Bethersden
Ashford
Kent
TN26 3DL
England
Tel (UK) 01233-820082, or email Aaron.
Click here for a diagram showing how to wire Aaron's pickups into a passive circuit. The switch is a DPST switch.
I go for 45, 65, 80, 100 gauge Ernie Balls on my narrow-necked SB-700, and 45, 65, 85, 105 Ernie Balls on my wide-necked SB-R60 and also on my SB-1200. These have no coloured windings and suit the wooden finishes. On my red SB-R80 I like 45, 65, 85, 105 GHS Boomers Flea Signature which have red windings at the headstock end only.
The man we are indebted to for designing the original SBs lives in Japan and is called Nobuaki Hayashi. On some SB headstocks you can see a sort of Anglicised version of his name, “H Noble”. SBs were were actually manufactured by a company called Matsumoku, with whom Aria had ties.Nowadays Nobuaki still designs basses and other stringed instruments, for his own company Atlansia in Nagano. His work remains right at the cutting edge of design, as you can see if you visit the Atlansia website. The site is in Japanese, but you can easily spend an hour drooling at the pictures. The sheer quality and innovation evident on the website is breathtaking. Some of the basses look gorgeous, some look a bit strange, but all are works of art.
My thanks to Masaki Kano and The Rat Hole (see above) for their help with this section.
If looking to buy, I suggest you start by looking locally - in music stores, music magazines and newspapers - because it is best to try before you buy. Failing this, you could try online. You get a fair number coming up on eBay (.co.uk for UK equivalent), or you could try Gbase. There are often Classified sections on Websites like Harmony Central. Try BassLinks for some other possible avenues. Good luck!
SBs have been fetching very handsome prices recently on eBay here in the UK. It looks like people are starting to appreciate their enduring quality. Recent prices include a pearl-white SB Elite I for £450, an oak-finished early SB-700 for £420, a paduak-red SB-R60 fetched £360 and a black/gold SB Elite I went for a hefty £510! But it all depends on model, condition and playability.