Page One / Page Two / Page Three / Page Four / Page Five / Page Six / Page Seven / Page Eight / Page Nine /
With the Wallboard now bonded to the wall in the Bathroom I have fitted some White Panelling to the Sink wall of the Bathroom.
I then used PVA glue (1 part PVA, 2 Parts Water) to Wallpaper the walls - I decided to go for a nice clean white wallpaper as the bathroom was pretty drab and dark/dreary before. I've purchased a sink and have started to build a unit to fit it into the bathroom as an alternative to the old Vanity unit but am still undecided which is best. Will see what the new sink turns out like before I fit everything back in.
Whilst I have removed the Shower Tray Floor of the bathroom I've also decided to run a cable underneath to the rear of the van so that I can fit a double gang socket into the rear seating area as there is a shortage of power points at the back.
So once the wallpapers dried in the morning I'll be running the cable through into the rear seating area of the van to be wired into a socket and refit the shower tray. I've then got to either fit my new sink along with taps etc or refit the old vanity unit - so I'm going to see which looks best once everythings in place before fixing it.
Once the Bathrooms done I'll then move onto the last patch of wallboard in the rear of the van....