The remains of the donor waiting to be collected		Marlin bits	Bump stop not aligning
Column in position mounted on adapter plate	Shortened column plus modified bulkhead closure plate and (unfinished) adapter plate	Fitted handbrake with homemade bracket at the rear. Handbrake cables still need shortening.	Handbrake cable end made from 6mm coachbolt with 3mm hole drilled thru' centre
Handbrake cable assembly (almost) complete	MKII handbrake ends. You can just see the holes where I applied the silver solder.	View of the low pressure fuel pump from underneath.	Mounting of front brake pipes.
Rear brake pipes.	Home made brackets to mount the rear anti-roll bar and low pressure fuel pump.	Top view of anti-roll bar and mounting for low pressure pump.	Servo and associated plumbing.
Fuel pipes from underside rear	Assembled pedal box from underside.	Assembled bedal box fro clutch pedal side.	Brake pedal detail showing modified fork and BMW brake light switch.
Clutch pedal detail.	Exhaust TR6 back box, straight pipies and front part of BMW system
	Rear box sits nicely between rear crosmmembers. Wooden blocks to be replaced with hangers!	Exhaust tailpipes exit just under bumper - puuuurfect	Radiator and oil cooler from front
Radiator and oil cooler from engine side showing Pacet fan	Radiator and oil cooler from front again	Radiator and oil cooler - it all fits!	Radiator and oil cooler - pipes to engine