MartinClan
Sportster Build Bodywork 5
| Home |
| Build notes |
| Construction 1 |
| Construction 2 |
| Construction 3 |
| Construction 4 |
| Construction 5 |
| Bodywork 1 |
| Bodywork 2 |
| Bodywork 3 |
| Bodywork 4 |
| Bodywork 5 |
| Trim 1 |
| Trim 2 |
| Post SVA |
| Links |
| Donor Vehicle |
| 318is |
 |
 |
 |
|
|
03/01/2009
Two of the four side repeaters I acquired. The one on the left was kindly given to me by Peter (used for his SVA) and is the only one E marked. The one on the right is not E-marked but looks nicer. |
03/01/2009
I discovered that the lense in the E-marked repeater was the same size as the one in the (prettier) non E-marked one and was able to swap them after a little fettling. |
03/01/2009
The hybrid repeater. E-marked, chrome bezel and removeable bulb. The E-marked one was sealed for life. |
03/01/2009
Mounted on the scuttle along with period Tek wing mirror. |
|
|
.
 |
 |
 |
|
03/01/2009
Another shot of the wing mirror. |
03/01/2009
Back of the mirror. It tick's all the SVA boxes (in theory at least) apart from the large mirror to stalk retaining nut which will need a nut cover. |
22/11/2008
Rear view mirror. Again I hope SVA freindly. |
22/01/2009
25mm Eibach spacers. Made of aluminium alloy and TUV approved. I am not a big fan of spacers and I wanted something well made. |
 |
 |
 |
|
|
22/01/2009
Bolted to the rear hubs using the supplied bolts. The wheels then bolt to the spacers. |
22/01/2009
Wheels now filling the wheel arch nicely. |
22/01/2009
Plenty of clearance for the inner wings. |
|
