Iain's 1970 MG BGT

Extra Kenlowe Fan Pictures

Following a couple of requests I have added a couple more pictures here.

The two pictures show where the copper tube from the temperature sender enters the top hose.  The rubber seal is provided as part of the kit. The order is metal radiator top pipe, kenlowe seal, copper tube, top hose, jubilee clip. I have had no leaks. The copper tube is pretty strong so you don't need to worry to much about flattening it with the jubilee clip. The pictures also show the wire from the control unit running across the top of the radiator (held in place with small cable ties through drilled holes) towards the fuse box.

And here is where the wire reaches. It's the red wire coming from the bottom of the picture. The fuse chosen is live when the ignition is on with my car. It would be worth checking for yours.

Two more pictures of how the fan is fixed onto the radiator. These are basically plastic fixings that work like cable ties. They are threaded through the actual radiator. I will get round to cutting them now I know it is secure!

Hope these extra pictures help!

Back to Kenlowe Fan Page