|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
sound proofing installed above headlining |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
damp proof membrane fitted |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Painted panels in Sandglow |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Offside rear wing in primer |
|
|
|
|
|
|
|
|
|
|
|
|
Rear nearside wing in primer |
|
|
|
|
|
|
|
|
|
|
|
|
Supply air and extract for paint spraying |
|
|
|
|
|
|
|
|
|
|
|
|
|
Supply air filter box for paint spraying |
|
|
|
|
|
|
|
|
|
|
workshop turned sprayshop |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Panels ready for spraying |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wood added to door panels |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nearside front inner wing |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Front end clamped on temp |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Front end clamped into position |
|
|
|
|
|
|
|
|
|
|
|
|
|
Removed rusty inner wings |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Overhauled brake calipers |
|
|
|
|
|
|
|
|
|
|
|
|
Overhaul kit for brake calipers |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Awaiting front inner wings |
|
|
|
|
|
|
|
|
|
|
|
|
Console with original Range rover radio |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sagging headlining material removed |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High level rear tail lights added |
|
|
|
|
|
|
|
|
|
|
|
|
|
High level rear tail lights added |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CB radio mounted from roof |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Access hole cut in floor for petrol pump |
|
|
|
|
|
|
|
|
|
|
|
|
Rear floor sealed and fixed down |
|
|
|
|
|
|
|
|
|
|
|
|
|
Rear brake bracket modified due to bodylift |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Front drivers side footwell finished |
|
|
|
|
|
|
|
|
|
|
|
|
Front passenger footwell finished |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fuel pipes into engine bay |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fuel pipes running through front bodylift bracket |
|
|
|
|
|
|
|
|
|
|
|
|
Front body support brackets |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cover piece made for fuel filler |
|
|
|
|
|
|
|
|
|
|
|
|
|
Later rear wing with higher fuel filler |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All holes filled with weld |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rear upper shock mount worn |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Body back on chassis - minus front end |
|
|
|
|
|
|
|
|
|
|
|
|
Bodylift mount underneath |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Body shell climbing onto chassis |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rust cut out of drivers footwell |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drivers footwell from outside |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rust cut out + metal welded in place |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Drivers footwell from underneath the vehicle |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Front chassis cleaned + painted |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stub flange from seized wheel bearing |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rear chassis cleaned + painted |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Paul trying to find holes! |
|
|
|
|
|
|
|
|
|
|
|
|
|
Chassis ready to be attacked |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Paul departing body from chassis |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This lot fell out from behind the dash! |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Nearside front inner wing |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dash + wiring being removed |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Thats why im getting wet feet! |
|
|
|
|
|
|
|
|
|
|
|
|
