Rolling Stock Page 1

Mineral (Slate) Wagon
A two bar slate wagon supplied with bobbins and brass floor. Bars are pre-drilled and slotted to aid construction.
Dimensions: 112mm Long 60mm Wide 50mm High, Wheelbase 42mm
Kit TL03K £22.00 RTR TL03 £56.00

Bolster Wagon

Has wooden planked floor and working bolster mechanism. Usually used in pairs.
Dimensions: 96mm Long 60mm Wide 65mm High, Wheelbase 42mm
Kit TL04K £20.00 RTR TL04 £52.00

Wooden Open Wagon
A two planked open wagon supplied with brass floor and corner angles. A good general purpose stock wagon.
Dimensions: 115mm Long 60mm Wide 48mm high, Wheelbase 42mm
Kit TL02K £20.0O RTR TL02 £54.00

A range of wagons and vans based upon those which previously ran on the Talyllyn Railway available in kit form or ready to run. These wagons are beautifully made using finest quality materials, mahogany, brass and white metal castings. All kits contain pre-cut and finished parts making construction a simple task.
The chassis used throughout the range consists of mahogany solebars, transoms and buffers, white metal axle boxes with brass pin-point bearings and brass detailing including transom rods and buffer strapping. Cast coupling hooks are provided.
ALL TALYLLYN WAGON AND VAN KITS REQUIRE SLATERS CURLY SPOKED WHEELSETS ORDER FRC at £7.50 AVAILABLE IN 32mm GAUGE ONLY.

Three Bar Slate Wagon

A three bar slate wagon supplied with bobbins and brass floor. Bars are pre-drilled and are overlapped at ends.
Dimensions: 112mm Long 60mm Wide 54mm High, Wheelbase 42mm
Kit TL12K £23.00 RTR TL12 £56.00

Splay Sided Iron Wagon
As above but with longitudinal sides sloping slightly outwards. Single end door.

Dimensions: 115mm Long 60mm Wide 53mm High, Wheelbase 42mm

Kit TL07K £24.00 RTR TL07 £56.00

Straight Sided Iron Wagon

Body is constructed entirely from brass plate with rivet detailing on brass strip. Single end door.
Dimensions: 115mm Long 60mm Wide 53mm High, Wheelbase 42mm
Kit TL06K £23.OO RTR TL06 £56.00

Covered Goods Van

Attractive goods van with highly curved roof and side door. Kit supplied with pre-formed roof and wooden floor.
Dimensions: 128mm Long 76mm Wide 111mm High, Wheelbase 48mm
Kit TL05K £27.OO RTR TL05 £70.00

Gunpowder Van
A four part high detail resin cast body with pre-formed aluminium pitched roof. An interesting yet easy to make quarry vehicle.
Dimensions: 112mm Long 60mm Wide 97mm High Wheelbase 42mm
Kit TL09K £26.00 RTR TL09 £64.00

Incline Wagon
Another brass bodied vehicle this time with a sloping body. Used for carrying waste and coal along inclines.
Dimensions: 112mm Long 60mm Wide 60mm High, Wheelbase 42mm
Kit TL08K £23.00 RTR TL08 £56.00