|
OBD2 DIAGNOSTICS
EcuExplorer - TARI RACING
SOFTWARE
|
Diagnostics & Tuning
MY98-01
Vehicles
post 1998, generally Subaru Impreza with newer
style dash & airbags, are equipped with an 16 Pin OBD2 diagnostics
port located under the drivers side dash compartment. From this,
the car's ECU can be accessed to perform various tuning tasks
and diagnostics.
We can carry out diagnostics on your car, and repair accordingly.
If the CEL (check Engine Light) has illuminated on your dashboard,
we can find the fault for you, repair and reset
the ECU.
Using latest software, we can perform diagnostic checks, reset ECU's
and also carry out light tuning jobs such as ignition advance, which
if used in conjunction with modifications such as, exhaust de-cat,
performance induction or uprated fuel pump, along with using a
higher octane fuel, an advance of 1° in ignition, can increase
torque of up to 4%.
The diagnostic
procedure also checks the running of your vehicle in
real time, and will pick up any trouble codes stored in your ECU, once
the run has completed, the stored log file can be assessed to see how
the engine is performing, this will reveal, among other features, knock
correction, mass air flow, manifold pressure, air/fuel correction, plus
many more characteristics. This software also allows us to increase or
decrease idle speed, either in normal conditions, or for just when
the aircon is set, as this can affect the way your car can idle
when in operation.
Only Impreza's MY98 onwards fitted with the OBD2 diagnostics port are
available
for this service to be carried out. We do not undertake full re-maps..
* PLEASE CONTACT US FOR FURTHER DETAILS *
|
|
HiDash - DIAGNOSTIC
SOFTWARE
|
Diagnostics - Subaru
Impreza MY93-98
Vehicles pre
OBD2 (Impreza MY93-98), also have a
diagnostics connector under the drivers side Dash
panel, this is in the form of a yellow ISO 9-pin
connector which can give similar results as OBD2
software, but at a lesser scale.
We also carry out Diagnostics on earlier Subaru
Impreza’s / Legacy, U.K or Jap Import vehicles,
the Subaru Select Monitor is widely used by main
dealers for fault finding, our laptop based
diagnostics software, HiDash, can monitor the
same characteristics as the dealers hand held
device can, and more. HiDash can not only read
live data, but also digital parameters, operation
of solenoids, relays, fans and switches, plus
simultaneous live graphing data.
By using the latest version of HiDash diagnostic
software, up to 17 parameters can be monitored
and logged, giving a live data read out. These are
useful for fault finding and tuning, and with the
aid of live data graphing, for comparing multiple
statistics of your engines performance.
If your check
engine light has illuminated, or the
car has encountered a problem, we can run a fault
test to see what error code has been stored in the Ecu.
The trouble code can be sourced and fixed accordingly,
and the memory can then be cleared and the ECU re-set.
|
