My Hoard of BSA parts, time to make space (in the kitchen), so time to go. Mostly B and M series but some other non BSA components like Triumph, AJS and god knows what else. There is a fair amount of unused stuff to be found amongst the rusty bits! A lot of it I’m not aware of , I keep finding stuff  I didn’t I know I had! May be of interest to an auto jumbler or serious enthusiast! I've added only brief descriptions as will take forever to go into detail hopefully the pictures will paint a thousand words! There a few engine bottom ends/barrels and heads and enough parts to probably complete them.

Items to be sold individually or as a job lot.
Please note:- the items below are not 'grouped' in any way it's just the way I've put them together for the pictures. If you are interested in just a singe item (i.e valve spring) that's great. I've only numbered the pictures for easier reference they are not lots.

Telephone 07754264230 or email me

1

Selection of valve springs, guides, collets etc - some unused valves and guides etc to be found here.

2

Con rods, unused Apha big end, new/reconditioned bearings, big end components new or reconditioned. Steering bearing races used.

3

A selection of BSA piston rings, including 650cc, A10, 250 1937, D3's etc. Some standard some oversize all Hepolite apart from one. Most are still sealed but one or two may have a ring missing.

4

A selection of gearbox internals, some unused shafts and gears.

5

Another selection of gearbox internals, quite a few unused components here

6

A box of all sorts with unused valve guides, springs, brake linings, bearing races, bushes etc and some electrical stuff and lots of other goodies.

7

A big box of sprockets, valves and guides, pinion sleeves (some unused). sleeve collars, cush drive sleeves and springs, cam wheel and camshaft and other bits.

8

A box containing girder spring, top yokes, foot rests etc.

9

A box containing girder fork yokes, push rod cover tubes, early gearbox cover unknown make, early mag end, unknown rocker cover etc etc.

10

A selection of valves and guides (most unused) cams and unused bushes and other bits and pieces.

11

A selection  of clutch plates and drum.

12

Box of odds and sods and engine plate.

13

Box with plunger springs, gearbox parts, crank pin, kick start lever and gear lever etc.

14

A selection of brake shoes

15

Flywheels, timing casting, bottom yoke, engine & gearbox plates, gearbox inner and outer casings.

16

Fork tubes and some new springs - I think the fork tubes are mostly Triumph?

17

Timing covers, engraved gearbox cover (very 70's), clutch outer, the con rod is a unused C10/C10L, new valves C11?? mounts etc etc.

18

Gear box and M33 engine minus head.
BOTH SOLD

19

Box of all sorts of bits and pieces.

20

Burgman gearbox casings and a AJS twin head(s) complete with valves, rockers etc and valve covers.

21

Plunger suspension components.
These are all new re- manufactured parts, the outer sliders still need reaming.

22

B31 engine mostly complete - main parts missing pistion and valves / guides valve springs etc - I'm sure you find them somewhere?? ;~)

SOLD

23

Side valve head and barrel.
Pair of crankshfts.

HEAD AND BARREL SOLD

24

Exhaust pipes.
A couple of rims and brake drum.

25

1949 rigid M20/21 front frame section.

26

M20/21 plunger rear frame section.

27

Box of bits  - crank is probably C10 / C11.

28

M20 bottom end, a couple timing side crankcases and gearbox minus outer covers.

M20 BOTTON END SOLD

29

Primary chain cover outer, gearbox outer's and gear boxes.

CHAIN CASE SOLD

30

C11 head, barrels, con rod etc.

31

A box of all sorts of goodies!

32

Gearbox plates (B type), QD brake drums, piston and a couple of clutch sleeves (AA type) and a possibly an AA clutch spring (or engine shock spring) ??

PLATES AND BRAKE DRUMS SOLD

33

Two heads and two barrels one with a few fins missing and M21 bottom end.

M21 AND HEADS SOLD