|
Walkers Railways’s Site |
|
PETROL LOCO UPGRADE PAGE lll |
|
Page 40 |
|
We did not cut into the old holes on top of the box as the bearers will go back in the same place. We turned down the wheel shafts on a M7. |
|
|
|
We put the wheels back on and welded up the side with the extend shaft |
|
See above. We refit the wheels in the bearings and refit the beading back onto the box using the old holes. |
|
This will keep the two sets of wheels in place. |
|
As you can see the extend shaft from wheels is on the same side as the pulley in the middle of the box as this will be part of the 4 wheel drive |
|
NEXT PAGE |